Hallberg-Rassy 50
PUSHING THE BOUNDARIES
The all-new Hallberg-Rassy 50 follows the big success with the 57, 44, 40C and 340. The new 50 is designed for effortless sailing and great comfort with lots of storage. The Hallberg-Rassy 50 pushes the boundaries for what is possible up to 50 ft and at the same time remains true to the classic Hallberg-Rassy fundamentals.
MAJOR LEAP FOR EFFORTLES CRUISING - CARBON FURLING MAST
Hallberg-Rassy and Seldén are tweaking the concept of cruising by blending it with a great deal of performance. Carbon in-mast furling now takes push button performance to a completely new level. This set-up reduces the heeling and the weather helm to a minimum and improves up-wind performance. The lighter mast also makes for less pitching and pumping in choppy and big seas and the whole set-up will give a richer over-all sailing experience. Read more about it under News
LOTS OF VOLUME, COMFORT AND STORAGE
Traditionally we are used to comparing boats with hull length in feet. But much more relevant is the waterline length. The new 50 has a waterline that is as much as 50 cm / 1’ 8’’ longer than on the Hallberg-Rassy 55. Longer waterline gives better sailing performance with longer average day runs and at the same time more interior volume, comfort and storage under deck. The width is 33 cm larger at the widest point and an incredible 1.08 m wider than the 55 on the transom. That further enhances interior volume and storage.
SOFT MOTION IN A SEAWAY
The modern and most efficient hull shape gives superior sailing performance. At the same time, the forward under water part of the hull is rounded, almost like an egg, and this means soft motion in a seaway at any angle of heel. The displacement of the hull is designed to carry all modern comfort equipment and lots of personal belongings, as well as generous tank capacity.
BIG AND WELL PROTECTED COCKPIT
Typical Hallberg-Rassy, the cockpit is very well sheltered with high all-round coamings and a soft top or hard top windscreen with tempered glass, opening mid section and handholds at the sides. This is the ideal cockpit solution for both hot and cold areas. There is good all-round visibility. With twin wheels, there is both lots of space for displays and buttons and an easy passage from the helm position and forward. Furthermore, the wheel positions give better visibility forward, both when maneuvering in a harbour and to see the tell tails of the headsail. There is an optional big fixed high gloss varnished teak table with drop leaves.
MODERN AND EASY TO HANDLE SAIL PLAN
The rig is modern and easy to handle. It is even possible to fly an inner removable heavy weather sail with no runners. The foresail is only slightly overlapping, making tacking easy. There is also an option for a self tacking jib arrangement. Seldén electric furling for both in-mast and headsail, as well as electric sheet winches are fitted as standard. The main is designed to carry an Elvström FatFurl modern in-mast furling sail with Epex membrane, with roach, vertical battens and headboard. The top shrouds and lowers are to separate chain plates, a Hallberg-Rassy invention, which makes passage on deck easy, and arranges for easy sheeting of the headsail. The spreader base gets wide and stable in that way too. The deck plan is clean and uncluttered.
LOTS OF DECK STORAGE
The deck storage is generous. There is not only an enormous deck locker between the forward cabin and the chain locker, there are also two top opening deck lockers aft, one locker in the cockpit and good storage for fenders and ropes also above the chain locker.
TWIN RUDDERS
The steering system has twin rudders, superior both in terms of control when sailing, as well as pleasant vibration free motoring and also from a safety perspective.
ONE LEVEL SOLE
The interior sole is at one level throughout the boat. This gives easy movement both at sea and at anchor or in a marina.
BRIGHT AND AIRY INTERIOR WITH LOTS OF STORAGE
The interior has lots of natural light and indirect led lights as well. There is good ventilation. The layout is generous and roomy, with lots of elbow room. The storage facilities are generous too. The sturdy woodwork has the well renowned Hallberg-Rassy finish.
GENEROUS STANDARD EQUIPMENT
The sail away standard equipment list is very extensive, including for example electric in-mast furling and electric headsail furler, sails, teak deck, retractable bow thruster from Sleipner Side-Power, a 12 kW generator, a 110 HP main engine, electric cooking, fridge and freezer, launching and rigging at the yard, antifouling, fenders, mooring lines and a lot more.
WALK-IN ENGINE ROOM
There is a large walk-in engine room. Easy access, easy maintenance and careful sound insulation covered by aluminium linings. There is access from a big door on the port side, as well as a lifting stair in front and a removable panel in the aft end of the engine room. Furthermore, the floor in the cockpit is bolted and removable. In the engine room the technical equipment is found: a powerful common rail main engine, the generator with sound shield, pumps, filters, double heaters, AquaDrive flexible coupling to take up the loads from the engine shaft and further lower vibrations and noise. The engine room lighting is 24 v, and there is also a powerful optional 230 v led light. The Mastervolt Combi Pro charger/inverter automatically and quickly changes between shore power and inverter, depending on what is available.
AVAILABLE NOW FOR VIEWING AT THE YARD
The first four units of the all-new Hallberg-Rassy 50 are already in production, and the first fully finished boat is available at the yard from January 2021.
Hull and Deck
Hand lay-up GRP hull, insulated with Divinycell closed cell PVC-foam against heat and cold, except in the keel area and high load areas which have solid laminate. Integrated rubbing strake with stainless strip. White hull with blue decorative band in gelcoat. Isophtalic gelcoat and a protective vinylester based barrier coat between the gelcoat and the GRP. Strong under floor reinforcements. Steel beam molded into the hull stiffener under the mast support for additional reinforcement. Reinforced lead keel with bulb bolted on with stainless steel bolts. The rudders are carefully mounted with self-aligning spherical bearings for sensitive rudder feel. Emergency steering is supplied. Strong engine foundations of GRP for effective sound insulation. Deck and coach roof areas and also cockpit are of sandwich construction, solid in parts, laminated to the hull. Eight hull portlights.
Deck and deck fittings
Deck, toerail, cockpit seats, cockpit floor and cockpit coamings in top quality teak. Teak hand rails. Strong stemhead fitting. Integrated anchor roller in bow sprit. Electric windlass. Ultra anchor 35 kg. Chain 70 m, 12 mm. Cockpit locker. Six strong stainless cleats forward, midships and aft. Double stainless guardrails. Opening gates port and starboard. Two scuppers on each side which drain rain water overboard just under waterline to prevent staining the hull. Headsail tracks with blocks. Headsail car adjustable with lines from the cockpit. Electric selftailing genoa sheet winches, Lewmar 65 Evo chrome electric, one electric main sheet winch Lewmar 50 Evo chrome electric. Hatches in foredeck, forward toilet compartment, starboard cabin, saloon and in aft cabin. Many port holes, 9 of these are opening. Pulpit and pushpit have opening for easy access on board. Stowage in two aft deck lazarette lockers. Cockpit locker, big deck storage between v cabin and the anchor locker. Fold-out bathing platform in transom with bathing ladder.
Cockpit
On starboard side there is a dry stowage locker. The lid has a gas spring. The cockpit floor is covered with a teak grating. Twin wheels steering with single lever engine control. The wheels are leather covered. Removable teak cockpit table. Panel for engine instruments in a steering pedestal within easy reach of helmsman. Two large cockpit drains. Strong windscreen, tempered glass with opening center section and sprayhood over front part of cockpit. The sprayhood can be rolled away neatly into a protective cover. On either side of sliding hatch there are useful teak covered work surfaces. These work tables and the washboards are high gloss varnished (on request the work tables available in natural teak). Above the sliding hatch Raymarine instruments; one i50 Speed, one i50 Depth and i60 Wind.
Mast and rigging
Triple swept back spreaders rig, Seldén Furlin, electric in-mast furling. Main boom with outhaul. Jib furling and reefing system Seldén Furlex TD electric with under deck drum. Rigid vang with spring. Mechanic backstay tensioner. Selftailing winch for main and jib halyard. Several cleats for various uses. Generous dimensions of standing and running rigging avoid fatigue during unrestricted ocean sailing. Windex wind indicator and led anchor light on mast top.
Sails
Furling mainsail and furling genoajib in polyester Pro Radial Trioptimal, in special Offshore quality by Elvstrøm Sails, Denmark. Coded sail bags.
Accommodation details
One level sole throughout the boat. As standard the boat has the galley to starboard, two saloon sofas and two separate aft cabin berths. There are many layout options including two armchairs available in the saloon, a centre line sette in the saloon and a queen size centre berth in the aft cabin with a seat on each side and a vanity table. There is a linear galley to port available. All these options are subject to additional costs. You may combine the different interior versions. All interior woodwork in light mahogany matt silk finish. Flat locker doors, invisible hinges and ventilation above. Floor is varnished wood with inlaid holly strips. Saloon and aft cabin ceiling have paneling with mahogany strips and ceilings in remainder of boat has light lining. Cushions on all berths 12 cm / 5’’ thick and resting on unvarnished, well-ventilated boards to avoid condensation. Handholds are in all the right positions. Portholes are fitted with curtains. Skylight hatches in sleeping cabins have curtains.
Saloon
The settee offers comfortable seating. On the starboard side 2.48 m/8’ 2’’ with the larger optional galley between the bulkheads, with the standard layout 2.20 m / 7’ 3’’. L-sofa that has backrests with hinges so that the space behind can be utilised as storage. On port side 1.99 m 6’ 6 1/2’’ long settee. The backrests can be lifted to reveal additional storage. Between the settees a strong table with foldable side. Bar in the table. As an option at additional cost two easy chairs can be ordered. Headroom in saloon 2.14 m / 7’ 0’’.
Galley
U shaped, placed to starboard. Working surface in Corian with strong, all round wooden fiddle rail, which is milled so it can be used as a handhold as well. Two carefully insulated boxes with baskets, one top opening box for fridge and one top loaded for freezer. The latter may be switched over to fridge using the same compressor. Fridge and Freezer compressors are sea water cooled. Extra deep, double sink. Force 10 electric cooker with oven, well gimballed and locking device for oven door and also for the cooker when in use in the marina. Crockery locker and cutlery drawer. Bread board. Room for saucepans and other kitchen utensils. There are special places for the waste bin and other items.
Forward Heads Compartment
Bulkheads and lockers in white formica. Teak grating, Corian wash basin and countertops. There is a large mirror. Separate shower with watertight shower stall, acrylic glass doors. Shower water drained by pump directly overboard without going into bilges. Hand switch for shower pump for utmost safety. Strong, reliable pump action toilet. Appx 82 litres/22 US gallon holding tank, emptied by gravity or by deck pump out. Cupboard above and below washbasin. Ventilation through opening hatch and automatic vent.
Forward Cabin
The door to the forward cabin has been arranged in such a way to allow free movement for dressing. Two 2.03 m/6’ 8’’ long separate berths with ample stowage above and below and two additional hanging lockers. Headroom 1.93 m/6’ 4’’ Two large deck hatches for light, ventilation and access for sails. Automatic vent on fore deck.
Starboard side cabin
On starboard, a wide bunk sleeping cabin, berth length 2.01 m/6’ 7’’. There is a mirror, a vanity and hanging locker.
Work Table and Walkthrough
A comfortable work table seat with spacious table to port. Drawers, stowage slots and wet locker. There is a larger rubber sealed door access to the walk-in engine room off the walkthrough. Good headroom 2.01 m / 6’ 7’’ in the walkthrough thanks to use of cockpit coaming for headroom.
Aft Cabin
Aft cabin has two hanging lockers and two comfortable berths, 2.02 m / 6’ 8’’ long. Stowage room below and above. There is a mirror fitted. Seat between the berths. As an option at additional cost one big double centre bed and a seat on each side, with vanity table, may be ordered.
Aft Heads
Bulkheads and lockers in white formica. Teak grating. Wash basin and countertops in Corian. Mirrors. Separate shower with watertight shower stall, acrylic glass doors. Shower water drained by pump directly overboard without going into bilges. Hand switch for shower pump for utmost safety. Strong, reliable pump action toilet. Appx 130 litres/34 US gallon holding tank, emptied by gravity or by deck pump out. Cupboard above and below washbasin. Ventilation through opening porthole.
Engine and Engine Room
Walk-in engine room. The sound insulation is covered by perforated aluminium linings. Engine: Yanmar 4JH110CR, 81 kW/110 HP at crank shaft. Maximum torque 275 Nm. The engine has common rail fuel injection, double overhead camshafts and four valves per cylinder. Mounted with four rubber feet on strong foundations to avoid vibration and noise. Fixed three bladed propeller. Water-cooled rubber exhaust pipe. Freshwater cooled engine. Aqua Drive flexible link for a quiet and smooth engine.The engine start is served by a separate 12 V battery. There is a large filter for cooling water. The bilge pump has been installed in a position where it can be cleaned even in extremely bad weather conditions. There is a sump pump in the engine room in order to empty water or dirt from the fuel tank. The hot freshwater circuit is led into a 50 litres well insulated hot water tank in the aft cabin. Due to the good insulation water remains hot for many hours after the engine has been run.
Bow thruster
Sleipner SidePower retractable bow thruster, 210 kg thrust at 24 volts. Model name SRV170/250TC.
Diesel
Approximately 1 000 litres / 264 US gallon in three tanks, with fuel gauge. The tanks are filled through deck inlets. Between tanks and engine there is a further large water and coarse filter in addition to the one on the engine.
Fresh Water
Water capacity is approximately 800 litres / 211 US gallon. There is a water gauge for each tank. The water goes to a pump and then on to a pressure equalising tank, and from there via a manifold is distributed to a 50 litres/13 US gallon hot water calorifier (heated by 230 V and the engine’s cooling water) and the cold water system. As soon as a water tap is turned on the water which is under pressure in the pipes starts to flow. As soon as the pressure reduces the electric pump begins to work and will continue until the pressure is built up again after closing tap. Filling of water tanks is through deck inlet. There is a carbon filter for the fresh water system. There are three bilge pumps; one manual, one electric and one high capacity electric emergency bilge pump. The submersible emergency pump is operated from the cockpit.
Electricity
Generator Fischer Panda 15000i 12 kW (19i 15 kW option at additional cost) 230 v 50 Hz in sound shield. 230 v shore power with outlets in each cabin. Mastervolt Combi Pro 24 V / 230 V 3500 W 100 A with Masterview and shunt. Three separate circuits; one with 12 Volt and 95 Ah battery for engine and generator start, and one 24 Volt 230 Ah deepcycle for general 24 V use on board, covered by four 6 V 230 Ah deepcycle batteries. One 12 Volt 230 Ah deepcycle for general 12 V use on board, covered by two 6 V 230 Ah deepcycle batteries. Charging of batteries is by one 125 A 12 V and one 60 A 24 V alternator from the engine. Lighting throughout the boat is located in all the important positions. There are adjustable lights above berths and settee. Electric sockets at inner chart table and in the cockpit. There is a water and diesel meter. International led navigation lights, led steaming light and led anchor light. A wiring diagram is supplied with each boat.
Refrigeration
Two water cooled Isotherm SP systems with 24 V Danfoss compressor units, one for refrigeration and one for freezer. Both are very economical to run. The freezer has a double thermostat, enabling to use the freezer as fridge if required.
Ventilation
8 hatches, 9 opening port holes, companionway washboards, 8 vents; in forward cabin, forwards heads compartment, in the starboard cabin, two in the saloon, two in the aft cabin and one over the big forward deck locker. Separate electric engine room ventilation.
Steering
Twin Jefa wheel steering. Cardan linked rod steering with progressive purchase combines safety and fine feel in the best possible way. Illuminated compass. Leather covered steering wheels.
Safety and General
All outside skin fittings are speedily and securely sealed by using ballvalves with Delrin-sealer. Double hose clips are used under water. For the toilet special non-diffusing hoses are used. All electric cables are, where possible, laid in special channels and where this is not possible, cables are safely loomed away from the hull. There are large limber holes so that any water can easily drain to the bilge. The bilge is accessible by a removable floor panel without having to remove the steps. Inspection hatches for easy access to stop cocks and speed transducer. Four fire extinguishers, one fitted to the saloon table, one in the forward cabin, one in the aft cabin and one in the cockpit locker.
Type of Finish
The interior is treated with many coats of silk finish varnish. The underwater hull has two applications of epoxi primer and two coats of antifouling.
Certification
The boat is CE certified by DNV-GL (Det Norske VeritasGermanischer Lloyd) and delivered with a CE certificate and a CE plaquette for category A (unlimited ocean voyages).
Loose Equipment
- Flagstaff - Boat hook - 4 Fenders 10 x 25 - 4 Mooring lines 10 m / 33’ - Emergency steering - One winch handle
Modifications reserved. Chosen extra equipment may affect this standard specification. Drawings are for orientation only. Measurements are not to be taken from these drawings. Drawings and photos do show optional equipment.
